ION - Drum Rocker

Below are all the different types of ION. Select the device of your choice, to download the manual

Contents

gt lt ian DRUM ROCKER ENGLISH 1 Place base supports A on floor 2 Connect side supports B to base supports A 3 Connect center support C to side supports B 4 Connect side arms D to side supports B Wing nuts on each side arm should face out 5 Insert cymbal arms E amp F into side arm clamps Use the clamps closest to the center support 6 Undo wing nut and place cymbals G onto the cymbal arms E amp F You may also place the optional color rings M on top of the cymbals Tighten wing nuts to secure Note Using the yellow and green color rings is the most common configuration Alternately you could use the yellow and blue rings as long as the cymbals are connected to the jacks on the module that match their colors ...